Solar Grid Tie Inverter PM-6000GT

Mã sản phẩm PM-6000GT

Số lượng

Thông tin tóm tắt sản phẩm

Two built-in Independent MPPT Boosters increase overall efficiency Convectional Cooling System provided to guarantee quiet operation Compact Size, Light Weight Up to 95% high conversion efficiency

Hỗ trợ mua hàng

0987599957 - 01222544688

automation.saigon

dynamic_project

Description:
The GT series grid-connected Photovoltaic Inverter is delivered in a waterproof IP65 enclosure which can be installed in either a grid connected solar tracker system or a stationary PV system. By taking care of an accurate power conversion from solar panel to local grid, the GT series effects conversion process with minimal power loss and maximum reliability.

Specifications:

Model Item		PM-6000GT
Inverter Technology	Conversion Mode	Sine-wave, Current source, High frequency PWM
	Isolation Method	Transformer-less Design *
DC Input Data
Nominal DC Voltage		740 VDC
Max. DC input Voltage		1000 VDC
Working range		300VDC~1000VDC **
Max DC input current (Each MPPT Tracker)		17 Amp
MPPT Range		370 VDC ~ 850 VDC
MPPT Tracker		2
AC Output Data
Nominal AC Power		6000W
Max. AC Power		6600VA
Nominal AC Voltage		AC 230V x 3
Output Connect Method		3-Phase / 4-Wires (L1, L2, L3, N, PE)
AC Voltage Rang		184~264.5Vac(Base on 230 Vac)
Nominal AC Current		26.07Amp
Frequency		50/60Hz Auto-Selection (47.5 ~ 51.5 Hz or 59.3 ~ 60.5 Hz)
Power Factor		COS PHI 0.8-1.0
Current Distortion		Total Harmonic current : Less than 5% Single Harmonic current : Less than 3%
Efficiency Data
Max. efficiency		>97.5%
Euro efficiency		>96.2%
CEC efficiency		>96.2%
Environmental
Operating Temperature		-20 °C ~ + 60 °C
		-4 °F ~ 139 °F
Humidity		0 to 100%(Without condensation)
Altitude		0 ~ 2000 M / 0 ~ 6600 ft
Mechanical
Dimensions (H x W x D in mm )
Weight (Kgs / Lbs)
Protection Class		IP65, outdoor
Cooling		Fan-cooled
AC Connector		Connector
DC Connector		Connector
Communication
Communication Interface		RS232
		USB, RS485, Dry contact, TCP/IP
Front Panel
LCD		Boost input Voltage/Boost input Current/Boost input Power/AC output Voltage /AC output frequency/AC output current /AC output power/AC Energy yield/Inner Temperature/Heat sink Temperature /Status message/ Error message
LED		RED	On: Ground fault or DC input insulation fault
		Yellow	On: Unit Error or Alarm
		Green	Flash: Standby or Sleeping mode On: Normal Operation
Key Pad		UP key/ Down key/ Function key/ Enter key
Protection
Utility		Over/under Voltage, Over/under Frequency, Ground fault, DC Isolation fault
Islanding operation detection		Passive : Voltage phase jump detection Active : Reactive power control
Over Temperature		reduced output power
Certification
Safety		VDE 0126-1-1
		EN62109-1
EMI/EMC		EN 61000-6-1, EN 61000-6-3, EN 61000-3-3