Solar Grid Tie Inverter PM-4000GT

Mã sản phẩm PM-4000GT

Số lượng

Thông tin tóm tắt sản phẩm

Solar Grid Tie Inverter PM-4000GT Two built-in Independent MPPT Boosters increase overall efficiency Convectional Cooling System provided to guarantee quiet operation Compact Size, Light Weight Up to 95% high conversion efficiency Advanced DSP Control Technology delivers accurate data Ease of

Hỗ trợ mua hàng

0987599957 - 01222544688

automation.saigon

dynamic_project

Solar Grid Tie Inverter PM-4000GT

Description:
The GT series grid-connected Photovoltaic Inverter is delivered in a waterproof IP65 enclosure which can be installed in either a grid connected solar tracker system or a stationary PV system. By taking care of an accurate power conversion from solar panel to local grid, the GT series effects conversion process with minimal power loss and maximum reliability.

Specifications:

Model Item		PM-4000GT
Inverter Technology	Conversion Mode	Sine-wave, Current source, High frequency PWM
	Isolation Method	Transformer-less Design *
DC Input Data
Nominal DC Voltage		360 VDC
Max. DC input Voltage		500 VDC
Working range		120VDC~500VDC **
Max DC input current (Each MPPT Tracker)		14 Amp
MPPT Range		150 VDC ~ 450 VDC
MPPT Tracker		2
AC Output Data
Nominal AC Power		4000
Max. AC Power		4200
Nominal AC Voltage		AC 230V
Output Connect Method		1-Phase / 2-Wires(L, N, G) or 1-Phase / 3-Wires(L1, L2, G)
AC Voltage Rang		184~264.5Vac(Base on 230 Vac)
Nominal AC Current		17.4Amp
Frequency		50/60Hz Auto-Selection (47.5 ~ 50.2 Hz or 59.3 ~ 60.5 Hz)
Power Factor		>0.99 with nominal AC current
Current Distortion		Total Harmonic current : Less than 5% Single Harmonic current : Less than 3%
Efficiency Data
Max. efficiency		>96%
Euro efficiency		>94%
CEC efficiency		>94%
Environmental
Operating Temperature		-25 °C ~ + 50 °C
		-13 °F ~ 122 °F
Humidity		0 to 90%(Without condensation)
Altitude		0 ~ 2000 M / 0 ~ 6600 ft
Mechanical
Dimensions (H x W x D in mm )		455 x 510 x 170
Weight (Kgs / Lbs)		28 / 62
Protection Class		IP65, outdoor
Cooling		Free Convection
AC Connector		Terminal
DC Connector		Multi-Contact
Communication
Communication Interface		RS232
		USB, RS485, Dry contact, TCP/IP
Front Panel
LCD		Boost input Voltage/Boost input Current/Boost input Power/AC output Voltage /AC output frequency/AC output current /AC output power/AC Energy yield/Inner Temperature/Heat sink Temperature /Status message/ Error message
LED		Leakage current fault or DC input isolation fault
		Spec. of Utility is not matches with the Utility specifications of the inverter
		Solar Cell power is greater or smaller than sleep power
Key Pad		UP key/ Down key/ Function key/ Enter key
Protection
Utility		Over/under Voltage, Over/under Frequency, Ground fault, DC Isolation fault
Islanding operation detection		Passive : Voltage phase jump detection Active : Reactive power control
Over Temperature		reduced output power
Certification
Safety		VDE 0126-1-1, EN50178, IEC62103
		UL1741, IEEE1547
EMI/EMC		EN 6 1000-6-1, EN 6 1000-6-2, EN 6 1000-6-3, EN 6 1000-6-4